Armchair

Lyze

Armchair / cod.616

Florent Coirier found inspiration for the Lyze collection in a technical and timeless design which makes this group of furniture elegant and contemporary. The unusual stainless steel backrest is attached to the aluminium seat and comes in various sophisticated colour combinations. The fibre cement top coffee tables, along with the comfortable lounge chair, elegantly furnish leisure areas in all settings.
 

Designer: Florent Coirier

Material:  Aluminium - Stainless Steel

Collection:  Lyze

Wishlist
Wishlist

Technical Info

Weight: 6.30 Kg
Dimensions L/P/H: 62 x 57 x 79 cm
Stackable: 6
Seat Cushion: Yes
Static Load: 200 Kg
Test: EN581-1 / EN581-2
Cushion Material: Acrylic fabric

Maintenance

ALUMINIUM

To keep the product in good condition for a long time, we recommend cleaning it regularly; more often in very damp locations with a marine climate. It is recommended to clean the surfaces using a soft cloth with water or mild detergents. Prolonged and continuous exposure to intense UV radiation or very low temperatures can affect the initial characteristics of the coloured coating, which is made from polyester. We recommend cleaning and storing the products in sheltered places during prolonged periods of non-use and during the winter.



STAINLESS STEEL

Caution! a) DO NOT USE the following products on stainless steel parts: – Bleach or detergents containing bleach (which can corrode stainless steel); – Hydrochloric acid or products containing chloride (which can corrode stainless steel). b) Salt, limescale or acid (from coffee, wine, orange juice, tomato and lemon juice, etc.) may discolour stainless steel parts that are not cleaned immediately. c) Stainless steel products or parts used by the sea or for internal swimming pool furnishings require more frequent cleaning to remove deposits of chloride and to prevent the chemical corrosion of the external surface. d) Stains or rust marks on the stainless steel surface should be removed immediately. e) Stains left for a long time can become permanent f) Rust can chemically attack or corrode stainless steel. Removing stains or rust: – Apply a specific non-abrasive detergent/polish for stainless steel; – Test on a hidden stain to make sure that the original surface finish is not altered; – Remember to rub lengthwise (not in a circle); – Do not use abrasive pads; – Rinse thoroughly with clean water; – Finally dry thoroughly to prevent streaks, rub in the direction of the fibres.