Deck chair

Vetta

Deck chair / cod.171

Rope and steel come together in the perfect and original pairing that distinguishes Vetta, the leisure chair. The tubular frame folds over with the ease of the rope that emerges as its ideal extension and then comes full circle, hooking up at the bottom. Thanks to the slotting device at the end of the frame, the back can be set in two different positions for ease and comfort.
 

Material:  Emu-tex - Steel - Synthetic Rope

Collection:  Vetta

Wishlist
Wishlist

Technical Info

Weight: 7.70 Kg
Dimensions L/P/H: 78 x 104-110 x 80-90 cm
Folding: Yes
Reclining: Yes
Static Load: 200 Kg
Back Cushion: Yes
Cushion Material: Emu-Tex

Maintenance

EMU-TEX

Avoid prolonged contact with greasy substances and/or dyes, which may be absorbed by the coating material, causing permanent staining and deterioration of the yarn structure. Frequent washing: use water and non-abrasive, colourless liquid detergents with neutral PH. Leave the detergent to react for a few minutes, if required Rinse thoroughly with water at a temperature not exceeding 30°C. If pressurised devices are used, keep the diffuser tip at least 60/70 cm away from the surface of the item. Repeat the operation if necessary. Periodic and/or extraordinary washing: use a regenerating stain remover for PVC, following the procedure below. Operations to be performed: – apply the stain remover to the dirty fabric; – allow the product to act for 15-30 minutes; – rub the stained area using a common hard-bristle laundry brush (phase is necessary since the dirt is inside the weaving); – rinse with running water (if possible rinse using a high-pressure cleaner, remaining at a distance of approx. 60 cm so as not to damage the fabric with the high pressure); – repeat the operations if necessary. Note: when applying the product, pay attention not to apply it to the painted parts of the product.



STEEL

To keep the product in good condition for a long time, we recommend storing it indoors and in a dry place during the winter to prevent condensate from forming. Before the winter and on a quarterly basis, if the products are kept near the sea, it is recommended to clean the metal surfaces with a soft cloth using water or detergent and protect them with Vaseline oil or car wax.



SYNTHETIC ROPE

Clean using a mild detergent product and soft cloth.