All product images shown are for illustration purposes only and may not be an exact representation of the product.
Any products might be subject to modifications at any time without notice.

Linear module

Cannolè

Linear module / cod.1081

The Cannolè seating system by Anton Cristell and Emanuel Gargano has a fully welded structure made up of internally and externally galvanized steel tubes. Seat composed of a galvanized rod grid welded on a rod frame. The legs are made of tubular steel. MIG welding, degreasing and cataphoresis pre-treatment and finishing with thermosetting polyester powders. The collection consists of: Corner module sofa, linear module sofa, pouf, lounge chair and low table. All Cannolè cushions are made of polyurethane rubber to which a layer of polyester fiber resin is added, all packaged in an internal waterproof polyamide pillowcase.
 

Designer: Gargano-Cristell

Material:  Fabrics Basic - Fabrics Premium - Fabrics Standard - Steel

Collection:  Cannolè

Cushion Accessory: Decorative Cushion 40x40 - Decorative Cushion 45x35 - Decorative Cushion 60x40

More Info
Where to Find it
Vídeo

Technical Info

Weight: 19.50 Kg
Dimensions L/P/H: 85 x 90 x 79 cm
Static Load: 200 Kg
Cushion Material: Tessuto Basic|Tessuto Standard|Tessuto Premium

Download

> Log in or sign in
> Download the quality label
> Data Sheet
> 2D files (.dwg)
> 3D files (.3ds .c4d)
> Contract Projects
> Improper use and warnings
> Cushions: Care and Warnings
> Environmental label

Maintenance

FABRICS BASIC
Avoid prolonged contact with greasy substances and/or dyes or colorants that could be absorbed by the covering material and cause permanent stains, as well as deteriorating the yarn structure. In the case of use near the sea or swimming pools, periodic washing is recommended. Frequent washing: follow the specific instructions given on the label for each material. Use water and non-abrasive, colorless, neutral PH liquid detergents. If necessary, allow the detergent to act for a few minutes. Rinse thoroughly with water at a temperature not higher than 30°C (86°F). If pressure cleaning devices are used, keep the tip of the nozzle at a distance of at least 60-70 cm from the surface of the product. If necessary, repeat the operation. Do not use abrasive sponges to remove stains and do not treat with bleach or chlorine.
FABRICS PREMIUM
Avoid prolonged contact with greasy substances and/or dyes or colorants that could be absorbed by the covering material and cause permanent stains, as well as deteriorating the yarn structure. In the case of use near the sea or swimming pools, periodic washing is recommended. Frequent washing: follow the specific instructions given on the label for each material. Use water and non-abrasive, colorless, neutral PH liquid detergents. If necessary, allow the detergent to act for a few minutes. Rinse thoroughly with water at a temperature not higher than 30°C (86°F). If pressure cleaning devices are used, keep the tip of the nozzle at a distance of at least 60-70 cm from the surface of the product. If necessary, repeat the operation. Do not use abrasive sponges to remove stains and do not treat with bleach or chlorine.
FABRICS STANDARD
Avoid prolonged contact with greasy substances and/or dyes or colorants that could be absorbed by the covering material and cause permanent stains, as well as deteriorating the yarn structure. In the case of use near the sea or swimming pools, periodic washing is recommended. Frequent washing: follow the specific instructions given on the label for each material. Use water and non-abrasive, colorless, neutral PH liquid detergents. If necessary, allow the detergent to act for a few minutes. Rinse thoroughly with water at a temperature not higher than 30°C (86°F). If pressure cleaning devices are used, keep the tip of the nozzle at a distance of at least 60-70 cm from the surface of the product. If necessary, repeat the operation. Do not use abrasive sponges to remove stains and do not treat with bleach or chlorine.
STEEL

To keep the product in good condition for a long time, we recommend storing it indoors and in a dry place during the winter to prevent condensate from forming. Before the winter and on a quarterly basis, if the products are kept near the sea, it is recommended to clean the metal surfaces with a soft cloth using water or detergent and protect them with Vaseline oil or car wax.